Space constraints shouldn’t limit your ability to capture high-accuracy measurements. The OEM1000 offers a simple, effective solution for product innovations which require high-performance INS capabilities but are limited by space constraints.
문의하기
Budget-friendly, compact INS for space-constrained products
Featuring a combination of GNSS receivers and MEMS IMU, you will always receive accurate readings-whether the product is being used in tunnels, bridges or obstructed environments with poor satellite visibility. Dual GNSS receivers enable accurate and stable heading even when stationary. The blended INS measurements provide a comprehensive list of measurements including position, velocity, acceleration, and orientation.
CAN output | |
GX/IX™ RTK tight coupling technology | |
On-board NTRIP client | |
Wheel speed odometer input support | |
Network differential | |
Generic aiding input | |
Increased output rate up to 250Hz |
Autonomous vehicles |
|
Guided ADAS platforms |
|
Robotic systems |
|
Industrial automation |
Parameter | OEM1000 |
---|---|
Positioning |
GPS L1, L2 |
Position accuracy (CEP) |
2cm |
Roll and pitch (1σ)
|
0.05° |
Heading accuracy | 0.1° |
Acceleration bias stability | 0.02mg |
Acceleration range | 30g |
Angular Rate bias stability | 3˚/hr |
Angular Rate range | 300˚/s |
Maximum output rate | 250Hz |
Operating temperature | -40˚C to +70˚C |
Specification temperature | -10˚C to +70˚C |
Power input | 10-31V |
Power consumption | 9W |
Dimensions | 142 x 77 x 41mm |
Weight | 425g |
Internal storage | 32GB |
Interfaces | Ethernet, RS-232, CAN |
Dual antenna | Yes |